How To Clean A Mas Air Sensor Dodge Stratus 2006
How to Repair the Air Mass Sensor on a Contrivance Stratus
past Jeffrey Caldwell
Ablestock.com/AbleStock.com/Getty Images
The air mass sensor, too known equally the mass airflow sensor, or MAF, is located in the air intake tract on a Contrivance Stratus and measures the molecular weight of air entering the engine. This information is relayed to the engine computer and helps to determine fuel injector pulse width past turning the injectors on and off. Replacing the air mass sensor on a Dodge Stratus tin be achieved with a few simple tools.
Removing the Air Mass Sensor
Footstep one
Loosen the bolt that secures the negative battery cable to the battery, using a wrench. Then pull the cablevision off the bombardment.
Step ii
Locate the air mass sensor. It will be located on the air intake tract.
Footstep 3
Separate the wiring harness from the air mass sensor. Pry the retaining clip away from the sensor, using a flat blade screwdriver. Then pull the wiring connector off the sensor.
Step 4
Loosen the hose clamp that secures the intake tract to the intake housing, using a socket. Then pull the tract away from the housing.
Step 5
Unhook the latches that secure the air filter housing chapeau to the base with your hand. Then pull the chapeau and air filter off the base and remove it from the vehicle.
Pace 6
Unscrew the three bolts on the bottom of the air filter base of operations, using a socket. So pull the base from the engine bay.
Unscrew the bolts that secure the sensor to the intake tract. And so pull the sensor from the intake tract.
Installing the Air Mass Sensor
Step 1
Lay a new gasket between the intake tract and the air mass sensor. Then screw in the bolts that connect the sensor to the tract, using a socket.
Step two
Drib the air filter housing base into position and screw in the bolts that secure it to the vehicle's chassis, using a socket.
Step 3
Drop the air filter and cover into position. Close the latches that secure the air filter embrace to the base, using your mitt.
Stride 4
Slide the air intake tract onto the air filter housing cover. Tighten the hose clamp, using a socket.
Footstep 5
Press the wiring harness onto the air mass sensor.
Slide the negative battery cable onto the negative bombardment post. Tighten the retaining commodities, using a wrench.
References
- Haynes Chrysler Sebring Dodge Stratus & Avenger 1995 thru 2005; John A Wegmann and John H. Haynes; 2006
- Chilton Chrysler Cirrus/Stratus/Sebring/Avenger/Breeze Repair Transmission; the Nichols/Chilton Editor; 1998
Tips
- Be careful when separating the plastic wiring connector from the sensor. As the plastic ages, information technology can become brittle.
Things You'll Need
- Wrench fix
- Flat blade screwdriver
- Socket ready
- Replacement air mass sensor gasket
- Replacement air mass sensor
Warnings
- Ever disconnect the footing cablevision from the negative bombardment post before servicing whatsoever vehicle's electrical system. Failure to do and so could crusade injury or death.
Writer Bio
Jeffrey Caldwell has been a freelance writer for over five months and has published over 250 articles on websites similar eHow and Trails.com. Caldwell writes articles on a broad range of topics including travel, camping ground and automotive mechanics. He has a Bachelor of Arts in English language from Millersville Academy.
More than Articles
How To Clean A Mas Air Sensor Dodge Stratus 2006,
Source: https://itstillruns.com/repair-mass-sensor-dodge-stratus-6240056.html
Posted by: thompsonprien1967.blogspot.com
0 Response to "How To Clean A Mas Air Sensor Dodge Stratus 2006"
Post a Comment